KPN-Interactive Forum
http://forum.kpn-interactive.com/

How to connect the HP printer to the Windows OS?
http://forum.kpn-interactive.com/viewtopic.php?f=3&t=133012		 Page 1 of 1
Author:  hennry021 [ Tue Aug 09, 2022 9:05 pm ]
Post subject:  How to connect the HP printer to the Windows OS?
Setup HP printer through 123.hp.com/setup
  • Unpack the HP printer box, and then lift the printer carefully.
  • You can now proceed with the basic connection setup by using the 123.hp.com/setup to set up the initial printer setup.
  • Use the compatible system to connect the printer using a proper port connection between the printer's backside and the socket.
  • Turn ON the printer you wish to use and place the paper sheets in the input tray. Adjust the guide to avoid paper jams and other troubleshooting issues.
  • Next, place the ink cartridges in their respective slots.
  • Check the basics of the printer, and then change the start-up settings for the HP printer.
  • The HP Official Page has the latest HP Printer driver software. Download and install it. You can verify the driver setup by using the Windows settings> Devices> Printers&Scanners.
Page 1 of 1 All times are UTC
© 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com